Categories

False alarms and system malfunctions can be frustrating, and more importantly, may prevent your home security system from working how it should. Luckily, most troubles, from dead batteries to false alarms, are simple to fix. Take a look at our recommendations for troubleshooting your home alarm system in Orlando. We’ll help keep your household safe and your system running as it should.

Test Your Home Security System In Orlando

One sensible way to troubleshoot your home’s security is to test it yourself! Modern systems permit you to place them in test mode to keep you from triggering an emergency response. After switching to test mode, follow these steps:

• Activate your system as you typically would when you leave.
• Open a window or door that has a contact sensor, or test other equipment. Close the window or door once you’re done so it doesn’t trip the alarm as you reactivate the system.
• Permit the alarm to sound for 60 seconds to make sure a message is delivered to the security provider and an entry is made in the alarm activity log.
• Proceed to test sensors as needed
• Review the alarm’s activity log to verify that everything’s working.

No need to worry, monitoring specialists can tell that your alarm system is undergoing a test. Be sure to turn test mode off when complete. It’s smart to test every other month or whenever you change your home’s internet or phone service.

Evaluate The Positioning And Condition Of Motion Detectors

Although an essential element of your alarm system, motion detectors are well known for false alarms. Prevent them with some easy troubleshooting.

• Conduct a physical check. Are there objects that could shift within range of the sensor, like a curtain taken by a breeze?
• Is the sensor clean? Cobwebs, dirt, and grime can cause malfunctions. Ensure the device is clean.
• Does the motion detector come with pet immunity you can enable? Some can be configured to ignore pets weighing up to 100 pounds.
• When was the battery replaced? A low battery can affect performance or result in false alarms.
• Is a heat source impairing the sensor? Too much heat from a fireplace, direct sun, or something else can cause an alarm.

Keep Batteries On Hand And Pay Attention To Low Battery Warnings

One of the great advantages of modern home security systems is that they’ll tell you when batteries are getting low. If your system is equipped with a control panel or mobile app, you’ll often find notifications there. Depending on your system, you might hear an intermittent beep when batteries are running out. 

Motion detectors, smoke detectors, contact sensors, and other wireless devices have batteries that will have to be replaced every year or two. It’s a good idea to keep batteries ready and set a replacement schedule. Top systems also come with a backup battery for the primary control panel. This backup keeps your system functioning if you have a power outage and should recharge itself once power is restored. If it doesn’t recharge, you should replace it.

Troubleshooting Is Simple With ADT Home Security In Orlando 

As the leading name in home security, ADT designs systems that offer unrivaled protection and functionality. Switching to test mode is straightforward through the ADT+ app or MyADT.com, and you’ll always receive notifications when a sensor battery is nearing depletion. Contact Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfect for your Orlando home. Dial (407) 789-2352 or fill out our form today!