ADT® Authorized Dealer Serving Orlando, Kissimmee, & Surrounding Areas
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Orlando House

Homeowners must protect against numerous risks like burglary, flooding, and fire. But what about a danger that can’t be detected by human senses? Carbon monoxide creates a unique challenge because you may never realize it’s there. Despite that, using CO detectors can effectively shield yourself and your household. Learn more about this hazardous gas and where to place carbon monoxide detectors in your Orlando residence.

What Is Carbon Monoxide?

Referred to as the silent killer as of a result of its lack of odor, color, and taste, carbon monoxide is a common gas caused by the incomplete combustion of fuels. Any appliance that uses fuels like a fireplace or furnace can generate carbon monoxide. Even though you normally won’t have a problem, difficulties can present when appliances are not frequently inspected or properly vented. These oversights may lead to a proliferation of the potentially lethal gas in your interior. Generators and heating appliances are the most frequent causes for CO poisoning.

When subjected to minute levels of CO, you may notice dizziness, headaches, fatigue nausea, or vomiting. Extended exposure to elevated concentrations may result in cardiorespiratory failure, and potentially death.

Tips For Where To Place Orlando Carbon Monoxide Detectors

If you don’t use a carbon monoxide detector in your interior, get one today. Ideally, you should install one on every floor, including basements. Explore these suggestions on where to place carbon monoxide detectors in Orlando:

  • Install them on each level, specifically in places where you have fuel-burning appliances, like water heaters, furnaces, gas dryers, and fireplaces.
  • You should always use one within 10 feet of bedrooms. If you only have one carbon monoxide detector, this is where it should go.
  • install them about 10 to 20 feet from potential CO sources.
  • Avoid affixing them immediately beside or above fuel-utilizing appliances, as a non-hazardous amount of carbon monoxide may be released when they kick on and prompt a false alarm.
  • Secure them to walls approximately five feet above the ground so they may sample air where occupants are breathing it.
  • Avoid installing them in dead-air areas and near doors or windows.
  • Install one in areas above garages.

Inspect your CO detectors often and maintain them per manufacturer guidelines. You will usually need to replace units every five to six years. You should also ensure any fuel-burning appliances are in in good working condition and have proper ventilation.